Home>Docs>Documentation>Nodes>Guide: How to Set Up a File Node Pool

Guide: How to Set Up a File Node Pool

This guide walks a file node owner through running their own pool server.

In This Guide

  1. Introduction
  2. Pool Server Setup
  3. Updating and Verifying Pool Server
  4. Managing Pool Server
  5. Node Rewards

Check Your Network First

Before setting up a node pool at home, check that your network supports port forwarding natively. Pool servers need it.

On the local machine you plan to run the node pool on, open a command prompt (cmd on Windows) and type

tracert [your_ip_address]

replacing [your_ip_address] with your public IP address, which you can find by searching "what is my ip" online. You should see only one "hop", or line. If you see more than one, your network does not support port forwarding natively; contact your internet provider before going further.

Example:

tracert 64.233.176.138

Expected result:

1    <1 ms    <1 ms    <1 ms  199-119-153-199-119-153-27.cpe.sparklight.net [199.118.152.28]

(the numbers don't matter, but you should only have 1 line)